2019 Formula 1 car - 42096 B Model




This 42096 B model has the correct proportions of a 2019 Formula 1 car according to the official FIA 2019 F1 regulations in terms of total width, bodywork width, bodywork height, rear wing height, front wing overhang and rear wing overhang in scale 1:9.444. The scale is based on the diameter of the tires. The wheel base corresponds to the Mercedes F1 W10 car which is a whopping 49 studs!

  • Steering in Ackerman geometry
  • 4 wheel independent suspension.
  • Tiltable engine cover
  • Working fake engine

  • Length 59.5 cm (23.4 inches)
  • Width 22.3 cm (8.8 inches)
  • Height 13.5 cm (5.3 inches)
  • Weight 1.09 kg (2.4 lb)

The professional building instructions consisting of 330 steps in 204 pages are created with Bricklink Stud.io 2.0, here is an example of how the instructions look like:

I have spent a couple of 100's of hours on the design of the model and an additional +100 hours in creating the instructions. Hence, if you purchase the instructions I kindly request you not to share them. The set price is low so anybody that would like to build this model can afford to buy the instructions. In forehand thanks.


Bonus model
This model is designed solely with bricks available in the 42096-1 Porsche 911 RSR set but can also be motorized. Additional bonus instructions for motorization consisting of 31 steps in 31 pages are included at the end of the instructions document.
The motorized model weight is 1.33 kg (2.9 lb) and is geared up 3:1 so it is quite fast! The following additional parts are required for the motorization:

  1. Two  36 tooth gears
  2. 2 XL motors
  3. 1 servo motor
  4. 2 IR receivers
  5. 1 battery box
  6. 1 remote control

The motorized model is designed so it is very simple to change the batteries without having to disassemble the car:
  1. Remove the pins holding the curved panels of the side pods to the chassis
  2. Open the curved panel on one side and remove the 2 pins which hold the battery to the chassis
  3. Now flip the car so the side in which you removed the pins in step 2 is facing towards the table and the bottom is facing towards you
  4. Open the curved panel and remove the other two pins that are holding the battery
  5. Now tilt the car slightly towards you and the battery box will fall out and you can change the batteries even without disconnecting the cables from the battery box
  6. Once changed reverse steps 4-1
  7. Done!

The inventory includes all parts required regardless of which version you build (with exception of the motorization list above). This means that you will have parts over when building any of the two versions which is nothing to worry about.


Buy this MOC

Want to buy this MOC to build? You'll need to buy the parts and the building instructions using the tabs below.
Login to hide ads!


Name 2019 Formula 1 car - 42096 B Model
Designer ArcticBricks
Designed 2019
Inventory 1233
Theme Technic > Model > Race
Alternate Build of 42096-1 Porsche 911 RSR
Gingerbread House
Already have some of the parts? Use the Build this MOC page to only show the parts you are missing.
Create an account to change the default filters used.

Waiting for Inventory to load

PDF - Generated from Studio

Please Log In

Sorry, but you need to be logged in to buy these instructions so that you can download them again at any time. Login or quickly signup using the form below.
Help Guide - BI File Types