Blue Lightning Buggy

FOLLOWERS

4268

LIKES

Login to hide ads!

MOC-3028

Name Blue Lightning Buggy
Designer Madoca1977
Designed 2015
Inventory 471
Theme Technic
New and EXCLUSIVE Imperial Star Destroyer at LEGO.com!
Already have some of the parts? Use the Build this MOC page to only show the parts you are missing.
Create an account to change the default filters used.

Waiting for Inventory to load

Submitted by KyoBondz Nov. 5, 2019
Submitted by bgkim Sept. 3, 2019
Submitted by bgkim Sept. 3, 2019
Submitted by grzegorz May 27, 2019
Submitted by grzegorz May 27, 2019
Submitted by EscapeFromEden May 4, 2019
Submitted by EscapeFromEden May 4, 2019
Submitted by EscapeFromEden May 4, 2019
Submitted by EscapeFromEden May 4, 2019
Submitted by dede_aja_tuh April 21, 2019
Submitted by olivierz April 6, 2019
By using 3x5 quater-ellipse liftarms, you can neatly hide all the cables.
Submitted by pixelboy March 23, 2019
Submitted by Iatraliptes Dec. 28, 2018
Submitted by Iatraliptes Dec. 28, 2018
Submitted by Iatraliptes Dec. 28, 2018
Submitted by hdqslove Dec. 10, 2018
Submitted by hdqslove Dec. 10, 2018
Submitted by hdqslove Dec. 10, 2018
Submitted by pixelboy Dec. 4, 2018
I changed the front suspension, rocking bigger tires, different lights, a buwizz for extra fun, changed some parts' colors here and there
Submitted by Andreas.Berz Oct. 19, 2018
The original 9V AAA battery box (part 88000) was tranformed into a 3S LiPo accu with 650 mAh. It is a difficult work, because you have to fight for each millimeter of space. 
The original little electronic of the box also works fine with fully loaded LiPo at about 12,5V. A buck-boost-converter limits (or boosts) the voltage at 11,2V for the SBrick controller.
In the end, this is "poor man's ludicrous mode".
Submitted by Andreas.Berz Oct. 19, 2018
It contains a lot of modifications concerning rigidity.

These are the major changes:
(1) Upper pivot point of front suspension is realized by a modification of part 14720. The H-style liftarm have to be transformed into T-form.
(2) Added liftarm frame 5x7 part 64179 in the lower chassis center. As a result, another solution for fixing the driver seat was necesarry.
(3) Upper pivot point of rear suspension is reenforced by replacing the axle stop by connector part 6536. Also the 3L axle with stud replaced by 4L axle with stop.
(4) The ascending rollbar from lower middle to front has an open end in the original MOC. Now it is fixed with a torsion- and bend-free solution, but the 8L axle have to be cut to a custom length.
Submitted by egroeg Aug. 8, 2018
Submitted by egroeg Aug. 8, 2018
Submitted by egroeg Aug. 8, 2018
Submitted by egroeg Aug. 8, 2018
Submitted by Mikesa July 10, 2018
Submitted by chilikadse July 7, 2018
IR receiver has been replaced by a SBrick and adjusted the colors in black / lime.
Submitted by chilikadse July 7, 2018
IR receiver has been replaced by a SBrick and adjusted the colors in black / lime.
Submitted by commoc March 25, 2018
Submitted by horace0815 March 16, 2018

With BuWizz and some lights ;-)

Submitted by joonghyung Feb. 2, 2018