Aircraft Pushback Tractor

FOLLOWERS

261

LIKES

Machines of this kind is mainly used at airports when towing aircrafts to parking or vice versa - to the runway. I think everyone who has ever been in the large airports, have seen similar tugs. Less a similar technique can be found in seaports or any other freight terminals that require towing heavy loads.

This tug has four-wheel drive by two XL motors, independent steering front and rear axle on two servo motors, lifting mechanism cabin with 1 M motor, as well as a system of four mechanical jacks driven by two motors L or M. Full remote management for that answer 3 infrared receiver, and power models provide two large battery pack located on the sides, and of course, he has V10 on board!

Original model designer - filsawgood
Link to original model - https://rebrickable.com/mocs/MOC-4348/filsawgood/lego-technic-aircraft-tug-xl/#comments
Instruction by - Steelman14a

Note: Add some extension wires to connect motors and servo
Login to hide ads!

MOC-26069

Name Aircraft Pushback Tractor
Designer Steelman14a
Designed 2019
Inventory 1997
Theme Technic
Gingerbread House
Already have some of the parts? Use the Build this MOC page to only show the parts you are missing.
Create an account to change the default filters used.

Waiting for Inventory to load

AirPushBack_P1.pdf
June 24, 2019, 8:15 p.m.
75.3 MB
AirPushBack_P2.pdf
June 24, 2019, 8:15 p.m.
84.8 MB
AirPushBack_P3.pdf
June 24, 2019, 8:17 p.m.
63.3 MB
Help Guide - BI File Types
Submitted by joonghyung Sept. 1, 2019
Submitted by joonghyung Sept. 1, 2019
Submitted by BertZelf July 11, 2019
Just for fun ;-)
Submitted by BertZelf July 11, 2019
Flat and closed roof using sBricks. No need to have the infrared receivers peep through the roof.
Submitted by BertZelf July 11, 2019
Removed 2 beams (1x5 thin 11478) and added 2 beams (1x4 thin 32449) so the sBricks will not interfere with the roof.