Custom RC Arocs 42043 modification

FOLLOWERS

1648

LIKES

You are purchasing a PDF instructions with parts list and ordering code for the selected model

RC Arocs modification
This is an RC modification for the
42043 Mercedes-Benz Arocs 3245

Details of the model:
- A high-quality engineering RC conversion for fans and collectors
- Total number of required components - 2809 bricks (without hoses)
- Required parts for the RC conversion - 90 stones (including Powerfunction)
- Dimensions of the model B / T / H = 18.1 / 54.7 / 36.3 cm

Functions - pneumatically:

  • Crane lower raise
  • Arm lower raise
  • Retract arm
  • Close the bucket


Functions - mechanical:

  • Four-axle suspension
  • Open cab


Functions - electric:

  • Turn the crane
  • Tip the trough
  • Extend supports
  • Pneumatic pump
  • Steering left right (NEW)
  • Driving forward backward (NEW)


=> The existing motor is activated via a toggle switch

LEGO PF 8869

The parts list has been optimized for quantity and availability.

For more pictures click to the Image or www.custombricks.de
Login to hide ads!

MOC-24674

Name Custom RC Arocs 42043 modification
Designer CustomBricks.de
Designed 2019
Inventory 2807
Theme Technic
Modification of 42043-1 Mercedes Benz Arocs 3245

12 COMMENTS

  • 1 month, 3 weeks ago wwwchrisde (209)
    Hi, I like your 42082 RC MOC with SBRICK. Is this RC MOC also for use with SBRICK and Smartphone Bluetooth control - or is it vintage infrared RC?
    • 1 month, 3 weeks ago CustomBricks.de (6K) MOC Designer DESIGNER
      hello, if you look at the inventory you can see the normal IR receiver ;-) if you leave it out and use the SBrick instead, you just need an additional extension cable ;-) greetings
  • 2 months, 1 week ago Nick3 (2K)
    I see you use a Large motor straight into the differentials via the normal 20 tooth tan gear to drive the truck, does this not strain the motor?
    • 2 months, 1 week ago CustomBricks.de (6K) MOC Designer DESIGNER
      Hello, the engine runs without problems. I've driven several times for a long time. the engine is fine. hope that helps you ;-) greetings
  • 2 months, 3 weeks ago HPD (27)
    Just bought the instructions for the RC modification model 42043. Cant wait to start!  However I am facing some (startup) difficulties. It looks like I cannot open the 'embedded PDF pictures' from the excel file received. I like to print them out to build from old-school paper instructions. The second thing I cannot achieve is to copy the list of additional modification parts from the excel file to the 'Rebrickable.com' or 'Bricklink.com' page. This so I can purchase the required parts.
    I proceeded as instructed, but BrickLink (or Rebrickable.com)  page is not as seen on the instructions (different lay-out, maybe recently upgraded?).
    Therefore Bricklink is not recognizing the copy/pasted list when I paste this in the "search" section.
    Can you please advise?
    • 2 months, 3 weeks ago CustomBricks.de (6K) MOC Designer DESIGNER
      hello, please answer to your purchase confirmation. that you can not open the pdf then send you our support the pdf again.

      to Bricklink, you have to go to wanted / upload and switch to Bricklink upload XML. then just insert the XML code and you're done.

      Alternatively, you can also order the remodeling parts in our shop. you can calculate it on bricklink and then compare it with our shop. Due to the shipping costs in several shops, we are often the cheap alternative ;-)

      best regards
  • 3 months, 1 week ago drzoido (155)
    Question: in step 8 of your instruction one is supposed to follow the original 42043 instruction (pages 22-27). But here, I don‘t see the 20 tooth double bevel gear in tan (plus axle and bush) being used in your instruction. Is that supposed to be left out or just a mistake? And what about the 1x7 technic beam in LBG, same question here? BTW: Is the six-cylinder engine supposed to be disconnected from the drive train? Thanks in advance
    • 3 months, 1 week ago CustomBricks.de (6K) MOC Designer DESIGNER
      hello, the powerfunction drive the axle. The engine has too much friction, slows down the model and strains the battery too much. If I only push the model I want to turn the motor. when i ride it rc i want to have fun. ;-) regards
  • 5 months, 1 week ago psmyth (6K)
    very nice addition to this model...nice!!
  • 5 months, 1 week ago CustomBricks.de (6K) MOC Designer DESIGNER
    hello, many have tried it but we are the only ones who made the conversion right :) with the new RC functions, the suspension is not affected. the suspension is the best of the whole model. with the servo our steering has no play. that makes driving much more fun ;-) best regards
  • 5 months, 1 week ago Thewood (1350)
    Most of these things arent new but its still pretty cool
to your account to add or reply to comments.
Already have some of the parts? Use the Build this MOC page to only show the parts you are missing.
Create an account to change the default filters used.

Waiting for Inventory to load

Building Instructions For Sale

This is a Premium MOC, and the instructions to build it are being sold by the designer (CustomBricks.de) for €14.90

You will receive building instructions of type PDF - Computer Images from the designer once you have organised payment with them.

Help Guide - BI File Types
Submitted by LegoBro May 11, 2019